Summer Waves 14ft Pool Cover — Official Product Page
Our 14ft pool cover is designed specifically for Summer Waves above-ground pools, delivering year-round protection against leaves, debris, and UV damage. The heavy-duty polyethylene construction withstands harsh weather while the reinforced edges prevent tearing at attachment points.
We engineered this cover with an integrated drainage system that prevents water pooling and reduces stress on your pool frame. The secure rope-and-tie system keeps the cover taut even in high winds, while the dark tarp material naturally absorbs heat to extend your swimming season by maintaining warmer water temperatures.
- 14-foot diameter fits standard Summer Waves round frame pools
- Heavy-duty UV-resistant polyethylene blocks 99% of sunlight
- Reinforced perimeter grommets with corrosion-resistant metal rings
- Integrated drainage holes prevent water accumulation
- Rope-and-tie anchoring system included for secure fastening
Material & Weather Resistance
We manufacture our summer waves pool cover 14 ft from commercial-grade polyethylene reinforced with a woven scrim layer that resists punctures from sharp branches and prevents UV degradation. The material thickness of 6 mil provides the ideal balance between durability and manageable weight.
The dark navy blue surface absorbs solar energy throughout the day, transferring warmth to the water below and reducing heating costs by up to 40% during cooler months. Our chemical-resistant coating protects the tarp from chlorine exposure and prevents premature breakdown even when used continuously over multiple seasons.
Installation & Secure Fit
Measuring Your Pool
Our 14ft cover is engineered for pools with a 13’6″ to 14’2″ outer diameter, providing 3-6 inches of overlap for secure anchoring. Measure from outside wall to outside wall across the widest point of your pool frame to confirm compatibility.
Attachment System
We include a 50-foot length of marine-grade rope and eight heavy-duty tie hooks that thread through the perimeter grommets spaced every 18 inches around the cover. Position the cover centered over your pool, then weave the rope continuously through each grommet to create a drawstring effect that cinches the cover tightly against the pool sidewall.
Debris Management & Water Drainage
Strategic drainage perforations positioned 8 inches from the cover’s center allow rainwater to filter through while trapping leaves, twigs, and insects on the surface. This design prevents the dangerous weight buildup that causes sagging and potential frame damage on covered pools.
The slight dome shape created by proper rope tensioning naturally channels water toward the drainage zones, eliminating standing pools that breed mosquitoes or freeze into ice sheets during winter. Every two weeks during heavy debris seasons, simply sweep accumulated leaves toward the pool edge and remove them before they decompose.
Complete Your Summer Waves Pool Setup
What people are saying
Common Questions About Our 14ft Pool Cover
Yes, our 14ft cover is fully compatible with both Elite Frame pools and Quick Set inflatable ring models in the 14-foot size range. The flexible polyethylene material conforms to the different sidewall profiles of each pool type.
For Quick Set pools, allow the inflatable ring to remain fully inflated when installing the cover to maintain proper shape and tensioning. The rope system cinches below the ring bulge to hold the cover securely without deflating the air chamber.
We do not recommend walking directly on the cover, as concentrated weight can stress the material and grommets or push you through into the pool water below. Instead, use a soft-bristle pool brush attached to a telescoping pole to sweep snow and debris toward the pool edge.
For heavy snow accumulation exceeding 4 inches, carefully remove snow in sections from the pool deck using a standard snow shovel, working from the outer edges toward the center. Never use metal shovels or sharp tools directly on the cover surface.
Proper rope tensioning is critical to maintaining the slight dome shape that prevents sagging. Thread the rope through every grommet without skipping any, then pull it tight enough that you can press down 2-3 inches in the center but the cover springs back immediately.
Position an inflatable pool pillow or air bladder under the center of the cover before securing the ropes. This creates an elevated peak that naturally sheds water and snow toward the drainage holes, eliminating the depression where water typically pools.
Our 14ft pool cover is a heavy-duty debris cover designed primarily for off-season protection and blocking sunlight completely to prevent algae growth. Solar covers are thinner bubble-wrap style sheets used during swimming season to retain heat and reduce evaporation.
This cover absorbs solar heat and transfers some warmth to the water, but its main function is keeping out leaves, dirt, and insects. Most pool owners use a solar cover during summer and switch to our debris cover for extended closing periods or when the pool won’t be used for more than a week.
Inspect the rope before each installation season for fraying, discoloration, or loss of elasticity. Most customers get 2-3 seasons from the included rope before replacement becomes necessary, depending on UV exposure and how tightly you store the coiled rope.
Grommets typically last the lifetime of the cover if you avoid over-tightening the rope and distribute tension evenly. If a grommet does tear out, our repair kit includes reinforcement patches and new grommets that you can install with a simple grommet tool available at hardware stores.
Yes, this cover is specifically designed for use on filled pools, which is the standard configuration for both summer debris protection and winter closing. The drainage holes and reinforced construction handle the weight of rain and snow accumulation on top of water-filled pools.
Never use this cover on an empty pool, as wind can catch underneath and lift the entire cover away regardless of how well it’s anchored. The weight of the water pressing up against the cover from below is essential for keeping it properly seated and secure.
No, our 14ft cover is sized for pools with outer diameters between 13’6″ and 14’2″. Using it on a 15-foot pool will result in inadequate overlap at the edges, preventing proper rope tensioning and allowing gaps where debris can enter.
We manufacture a dedicated 15ft cover model (SKU: SWPC-15RD) for larger pools that provides the necessary 3-6 inch overlap required for secure fastening. Measure your pool’s outer frame diameter before ordering to ensure you select the correct size for reliable protection.